Wireless Indoor Air Quality Monitor GasDNA Gas Detector Malaysia, Kuala Lumpur (KL), Selangor, Kepong

Wireless Indoor Air Quality Monitor

Quantity: In Stock

Category: GasDNA Gas Detector

Quick Overview:

IAQ-700

IAQ-700 is a high accuracy indoor air quality monitor, which measure VOC. CO2, Temperature, Humidity and dust.
Through large size of graphic LCD, it provides real-time monitoring and can transmit data wirelessly through built in ZigBee.
After install indoor Watch (software), it enable to collect data at a long distance.
Relay Contact make it possible to interwork with a ventilating system.
It has been installed to measure Air quality of indoor or underground spaces like Factories, schools, Public places etc.

[ Features ]

Multi Gas Measurement

Measurement of VOC, CO2, Dust, Temperature and humidity at the same time.

ZigBee wireless communication

Can reach max 1.2Km in case of non-obstacle.

Real time storage of data

‘Indoor Watch’ program enable to transmit data in real time at a long distance

Digital Process

Measurement of VOC, CO2, Dust, Temperature and humidity at the same time.

LCD Display with Back-Light

Relay Signal-Output

Provide 2 Step-Relay Contact and interwork with a ventilating system

[ Specification ]


Segment		Specification
VOC	Detection principle	Semiconductor or PID
	Measurement range	0 ~ 1000 ppm
	Resolution	1 ppm
	Accuracy	£ ±3%/Full Scale
	Response time	within 20 seconds, 90%/full scale
CO2	Detection principle	NDIR
	Measurement range	400 ~ 10,000 ppm
	Resolution	10 ppm
	Accuracy	≤2% /full scale
	Response time	Within 30 sec (T90)
DUST	Detection principle	Light Scattering
	Measurement range	0 ~ 500 ㎍/㎥
	Resolution	1 ㎍/㎥
	Accuracy	£ ±3%/Full Scale
	Response time	Within 10 sec (T90)
Temperature	Detection principle	Thermister
	Measurement range	-25 ~ 60 ℃
	Resolution	0.2 ℃
	Accuracy	£ ±2%/Full Scale
	Response time	Within 10 sec (T90)
Humidity	Detection principle	Thin Film electronic capacity
	Measurement range	0 ~100%RH
	Resolution	0.4% RH
	Accuracy	£ ±3%/Full Scale
	Response time	Within 15 sec (T90)
Communication		ZigBee
Input power		DC9V ~ DC24V
Density Display		320×240 DOT Graphic LCD Display
Alarm Display		AL-1,AL-2 LED(RED)
Alarm Output		2 Step RELAY CONTACT
Operation Temperature		-10℃ ~ 70℃
Operation Humidity		5 ~ 95%RH (Non-Condensing)
Installation		Wall Mounting Type

Sorry, Currently No Video Uploaded.

Sorry, Currently No File Uploaded.